 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AGB3310 50 High Linearity Low Noise Internally Biased Wideband Gain Block PRELIMINARY DATA SHEET - Rev 1.0 FEATURES * * * * * * * * * On-chip Active Bias DC-3400 MHz Operation Bandwidth +37 dBm Output IP3 at 850 MHz 5 dB Noise Figure at 850 MHz 19 dB Gain at 850 MHz +19 dBm P1dB SOT-89 Package Single +5 V Supply Case Temperature: -40 to +85 C APPLICATIONS * * * * Cellular Base Stations for W-CDMA, CDMA, TDMA, GSM, PCS and CDPD systems Fixed Wireless MMDS/WLL WLAN S24 Package SOT-89 PRODUCT DESCRIPTION The AGB3310 is one of a series of high performance InGaP HBT amplifiers designed for use in applications requiring high linearity, low noise, and low distortion. Active bias circuits on-chip eliminate the need for external resistive feedback, and no external matching components are needed for insertion into a 50 system. With a high output IP3, low noise figure, and wide band operation, the AGB3310 is ideal for wireless infrastructure applications such as Cellular Base Stations, MMDS, and WLL. Offered in a low cost SOT-89 surface mount package, the AGB3310 requires a single +5 V supply, and typically consumes 0.4 Watts of power. RF Input RF Output / Bias Active Bias Figure 1: Block Diagram 07/2003 AGB3310 GND 4 1 RFIN 2 GND 3 RFOUT Figure 2: Pinout (X-ray Top View) Table 1: Pin Description PIN 1 2 3 4 NAME RFIN GND RFOUT GND DESCRIPTION RF Input Ground RF Output / Bias Ground 2 PRELIMINARY DATA SHEET - Rev 1.0 07/2003 AGB3310 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER Device Voltage (VCC) RF Input Power (PIN) Storage Temperature (TSTG) Junction Temperature MIN 0 -40 MAX +6 +10 +150 +200 UNIT VD C dB m C C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER Operating Frequency (f) (1) Supply Voltage (VSUPPLY) Case Temperature (TC) MIN -40 TYP +5 - MAX 3400 +85 UNIT MHz VD C C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. Notes: (1) Operating frequency is defined by the output return loss (S22) having a VSWR less than 2:1. PRELIMINARY DATA SHEET - Rev 1.0 07/2003 3 AGB3310 Table 4: Electrical Specifications (TA = +25 C, VSUPPLY = +5 VDC, 50 system) PARAMETER Gain (S21) 850 1950 2140 2450 Output IP3 (1) MIN MHz MHz MHz MHz MHz MHz MHz MHz - TYP 19.5 17 16.5 16 +37 +38 +39 +39 +19 5.2 140 80 MAX - UNIT dB 850 1950 2140 2450 dB m Output 1dB Compression (P1dB) 850 MHz Noise Figure 850 MHz Thermal Resistance ( JC) Supply Current (ICC) dB m dB C/W mA Notes: (1) OIP3 is measured with two tones at 1 MHz spacing at 0 dBm output power per tone. 2. Performance as measured on ANADIGICS test fixture (see Figure 3). All capacitors are muRata GRM39 series. The inductor is a Coilcraft 0603CS series. +5 VDC 10 pF 100 pF 0.01 F 100 nH 0.01 F RF Input AGB3310 0.01 F RF Output Figure 3: Application Circuit (50 Terminations) 4 PRELIMINARY DATA SHEET - Rev 1.0 07/2003 AGB3310 PERFORMANCE DATA Figure 4: Gain vs. Frequency De-embedded 50W S-parameter (TA = +25 C, VSUPPLY = +5 V, ICC = 80 mA) 25 0 Figure 5: Isolation vs. Frequency De-embedded 50W S-parameter (TA = +25 C, VSUPPLY = +5 V, ICC = 80 mA) 20 -10 15 Mag S12: Isolation (dB) 0 1 2 3 4 5 6 7 Mag S21: Gain (dB) -20 10 -30 5 -40 0 -50 0 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) Figure 6: Input Return Loss vs. Frequency De-embedded 50W S-parameter (TA = +25 C, VSUPPLY = +5 V, ICC = 80 mA) 0 0 Figure 7: Output Return Loss vs. Frequency De-embedded 50W S-parameter (TA = +25 C, VSUPPLY = +5 V, ICC = 80 mA) Mag S22: Output Return Loss (dB) Mag S11: Input Return Loss (dB) -10 -10 -20 -20 -30 -30 -40 -40 -50 0 1 2 3 4 5 6 7 -50 0 1 2 3 4 5 6 7 Frequency (GHz) Frequency (GHz) PRELIMINARY DATA SHEET - Rev 1.0 07/2003 5 AGB3310 PACKAGE OUTLINE Figure 8: S24 Package Outline - SOT-89 3310 LLLLNN LLLL= FOUR NUMERIC CHARACTERS Figure 9: Branding Specification 6 PRELIMINARY DATA SHEET - Rev 1.0 07/2003 AGB3310 NOTES PRELIMINARY DATA SHEET - Rev 1.0 07/2003 7 AGB3310 ORDERING INFORMATION PART NUMBER AGB3310S24Q1 TEMPERATURE RANGE -40 to +85C PACKAGE DESCRIPTION SOT-89 Package COMPONENT PACKAGING 1,000 piece Tape and Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 8 PRELIMINARY DATA SHEET - Rev 1.0 07/2003 |
Price & Availability of AGB3310
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |